settitng up my hardware

  • Thread starter Thread starter ediab
  • Start date Start date
E

ediab

Hi, I am just rebuilding my computer and want it to work smoothly. Can
someone please help with the hardware config. and setup?
I have a multi DVD writer, a DVD player, a 40Gb hd, and a floppy. Which
one(s) should be master, slave, etc.? Thanks and very appreciated.
 
The floppy is on a separate cable all by itself.

I would personally put the hard drive on the first IDE as master and the DVD
burner and ROM on the second IDE as master and slave (in that order). Then
if you want to get a second hard drive because if you're going to be burning
DVDs your hard drive is very small you can add the second hard drive as
slave.
 
hard drive should be "primary master" (the one with the Operating system)
with option to add slave hard disk on the primary channel

Secondary Master/Slave for your dvd/dvd-rw on the secondary channel
Floppy goes on its own IDE channel.
 
Back
Top