Setting up a VPN/RRAS in a DMZ??

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Do you need one or two NIC's for that? Im trying to set up my first VPN and
Im having a little trouble getting started. Its a MS 2003 box. Do I add it
to the domain, configure the NIC(S) and then install RRAS?
 
1. Assuming the server is behind a router, one NIC is OK.
2. Since this server is in the DMZ, I would not connect to the DC and join the domain.

How to setup VPN How to setup VPN server on 2003 server How to setup VPN on w2k server with one NIC How to use PPTP through a Cisco PIX Start Cisco VPN before logon Windows ...
www.howtonetworking.com/Windows/vpnsetup.htm


VPN Setup How to schedule to connect and disconnect a VPN How to setup VPN server on 2003 server How to setup VPN on w2k server with one NIC ....
www.howtonetworking.com/vpnsetup.htm



Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Do you need one or two NIC's for that? Im trying to set up my first VPN and
Im having a little trouble getting started. Its a MS 2003 box. Do I add it
to the domain, configure the NIC(S) and then install RRAS?
 
Back
Top