Service Pack 4

  • Thread starter Thread starter Jolyn
  • Start date Start date
J

Jolyn

I am trying to install W2k Advanced Server + SP4 to a industrial server.
This server uses adaptec scsi card, whereby channel A is connected to local
harddisks raid1 (C:\) while channel B is connect to external cluster storage.

When I first install W2k Advanced Server without service pack4, reboot with
channel B connected to cluster and there's no problem. But after I install
SP4 it took about 20-35 min to startup the operating system. It's still
taking so longer after i reinstall the SCSI & hostraid driver.

Any solutions for this?

Regards.
 
Perhaps enable boot logging, then view the log
Or look in Event Viewer
It appears to be hanging on a driver
Adaptec has no driver update?
 
Already installed the adaptec driver during OS installationg (by pressing F6).
I also tried to reinstall the drivers again after SP4 installation.
 
System log stated :
Source: adpu320
Event ID: 9
Description: The device, \Device\Scsi\adpu320, did not respond within the
timeout period

Dave Patrick said:
Is DNS correct? What sayeth the event log?


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

Jolyn said:
Already installed the adaptec driver during OS installationg (by pressing
F6).
I also tried to reinstall the drivers again after SP4 installation.
Click to expand...
Click to expand...
 
Then the adaptec driver is the problem, is an update of this or their card
firmware available on adaptec site?

Jolyn said:
System log stated :
Source: adpu320
Event ID: 9
Description: The device, \Device\Scsi\adpu320, did not respond within the
timeout period

Dave Patrick said:
Is DNS correct? What sayeth the event log?


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

Jolyn said:
Already installed the adaptec driver during OS installationg (by
pressing
F6).
I also tried to reinstall the drivers again after SP4 installation.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top