Server with static routes and two NICS

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a Server that is connected by leased lines ( router SDSL) to other two
server in brach offices. the first nic have the address 192.168.0.5 gateway
192.168.0.90, ihave 2 static routes pointing to route -p add IPREMOTESERVER1
mask 255.255.255.255 192.168.0.90 and route -p add IPREMOTESERVER2 mask
255.255.255.255 192.168.0.90. The adsl router to acces internet is the
192.168.0.254 So i need this server to use this gateway to connect to
internet (so I can connect remotely for support tasks) I install a secoin NIC
I configure un this the IP192.168.0.120 and gateway 192.168.0.254 but I cant
connect to internet. This is the correct way to do it or I must to change
something? THANKS
 
*One* Nic
*One* IP# (just use the 192.168.0.5)
Default Gateway = <Internet DSL router>

Keep the static routes like this.....
IPREMOTESERVER1 mask 255.255.255.255 <Lease Line Router to remote office>
IPREMOTESERVER2 mask 255.255.255.255 <Lease Line Router to remote office>


--
Phillip Windell
www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
 
Back
Top