Serial ATA HDD Problem

  • Thread starter Thread starter Christo.Coetzee
  • Start date Start date
C

Christo.Coetzee

Ok heres a nice one... I finally lost everything, To make a long story
short... I ghave 2 SATA drives in my computer (both Seagate 200GB). I
started removing all the files from my one hard drive to the other one
so i could reload my windows xp. Only after insallation I found the
following...

1) my SATA no 2 where i stored all my backups was no longer
functioning.
2) Partition RAW
3) No Label
4) NO data

when I loaded partition magic on the computer to see whether there was
any information on the drive left its label was still there, but it
didn't show me any data.

Is there any way of retreiving all my data or not?

Regard Chris
 
Only after installation of what....XP,so we guess you reinstalled xp to SATA
drive that was failing,tried to retrieve data from other SATA drive,did you
try running file transfer wizard..Where does partition majik fit in to the
mess...
 
At this time, do nothing with the drive or you may lose information.

The drive has lost it's partition structure or it's partition "type".

This happens occasionally. To my knowledge no one has ever figured out "why"
it happens!

The fix is not for the faint of heart and there is one thing that you
absolutely need to know before you begin. What TYPE of FILE SYSTEM was being
used on the hard drive? If you are 100% certain that you know there is (may
be) a way to recover.

There is a little DOS program included with Partition Magic 8.01. It is
called ptedit. This program can only be used from within "pure DOS". When
you use Partition Magic 8.01 to create the 2 disk floppy set (the DOS
version of Partition Magic) this little program is placed in the set.

You have to boot the computer from disk 1 of the floppy set. Then insert
disk 2 when asked to. After you are in Partition Magic, EXIT from the
program. You will be back at the A: prompt. Re-insert floppy disk 1.

Now, type in ptedit and press enter. The program will start. This program
allows you to change the drive "type". It is imperative that you are certain
that you are working on the correct drive. You can choose drives at the top
of the program window. Once you have chosen the correct drive, click in the
**Line 1 | Type** box.

This will energize the "Set_Type" box at the bottom. Now click the mouse on
the "Set_Type" BOX. Look for the file system that you KNOW was being used.
There are many choices. Choose the correct file system and follow the
instructions from there.

NOTE: If you choose the wrong file system, and commit the change, you "may"
corrupt any information that is on the drive. If this happens you may as
well format the drive and start over in a clean state.

I have successfully recovered about a dozen drives that have gone RAW, or
otherwise lost their partition structure, by using this great little DOS
program.

NOTE: The program CAN NOT be used from within Windows.

And "shame" on the computer manufacturers who deliver new computers without
a floppy drive installed!


There is also a Windows version of ptedit called ptedit32. The usage is the
same. Search Google to find a source for this utility.


--
Regards,

Richard Urban
Microsoft MVP Windows Shell/User

If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
 
Back
Top