second IP Address on the same interface

  • Thread starter Thread starter Andreas Wahlert
  • Start date Start date
A

Andreas Wahlert

Hi there,

for a secure smtp relay i need a second IP address on the same external
interface on a win2000 server. How can i do this??
Is this a problem for an ISA Server installed on the same maschine??


regards from germany

andreas
 
hi,

a. Click Start, point to Settings, and then click "Network and Dial-up
Connections".

b. Right-click the connection you want to configure, and then click
Properties.

c. On the General tab or Networking tab, click Internet Protocol (TCP/IP),
and then click Properties.

d. Click Advanced.

e. On the IP Settings tab, click Add in the "IP addresses" section.

f. Type an IP address and a subnet mask under the "IP address" and "Subnet
mask" headings, and then click Add.

g. Repeat step 1 for each IP address that you want to add, and then click
OK.

This should not be a problem for ISA Server.

--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.
 
a. Click Start, point to Settings, and then click "Network and Dial-up
Connections".

b. Right-click the connection you want to configure, and then click
Properties.

c. On the General tab or Networking tab, click Internet Protocol (TCP/IP),
and then click Properties.

d. Click Advanced.

e. On the IP Settings tab, click Add in the "IP addresses" section.

f. Type an IP address and a subnet mask under the "IP address" and "Subnet
mask" headings, and then click Add.

g. Repeat step 1 for each IP address that you want to add, and then click
OK.
Click to expand...

Wow... you can have two different IP addresses on the same NIC? #8-0

Do they have to have the same network number or anything? Or can you just
put two totally seperate addresses on it?

How bizare, how bizare...
 
Back
Top