Second hard drive

[Guest]

When I loaded Vista I changed the primary hd (raid) at the same time. I have
a second hd (ide) and unhooked it so windows would install the new drive as
C: Everything is up and running and now when I plug in the second hd Vista
won't boot. Anyone have any ideas?

 

[David B.]

Plug in the second drive, go into BIOS setup and make sure the correct hard
drive is listed as the boot drive.

--

----
Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm
How to ask a question http://support.microsoft.com/kb/555375
How to Post http://www.dts-l.org/goodpost.htm
http://www.db-pc.com
_________________________________________________________________________________

 

[Guest]

Good job, Dave. I should have thought of that!

Plug in the second drive, go into BIOS setup and make sure the correct hard
drive is listed as the boot drive.

--

----
Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm
How to ask a question http://support.microsoft.com/kb/555375
How to Post http://www.dts-l.org/goodpost.htm
http://www.db-pc.com
_________________________________________________________________________________

 

[Mike Hall - MS MVP Windows Shell/User]

Lee

Set the jumper to slave position, if the new drive is set to master..

Good job, Dave. I should have thought of that!

--


Mike Hall
MS MVP Windows Shell/User
http://msmvps.com/blogs/mikehall/

 

[Guest]

Primary drive is sata and the second is ide. two different busses. Thanks
Mike.