search button

  • Thread starter Thread starter Goldnstar
  • Start date Start date
G

Goldnstar

I have windows xp and when you click on the start button and then go to the
search button it does not work, it will freeze up for approx. 20 seconds.
It will take you know where, I've tried taking it off and putting it back
while rebooting and that does't work. Please Help if you can.

Thanks
Jeff
 
If this is a relatively recent issue, you might try using System Restore to
take you back to a time when this worked properly. If that doesn't resolve
it, try the information below.

The following assumes you have an actual XP CD as opposed to a restore CD or
restore partition supplied by your PC manufacturer.

Go to Start, type sfc /scannow in the run box and press enter. Note, there
is a space between sfc and the forward slash. You will be asked for your XP
CD. Be aware, upon inserting the CD the XP setup screen may appear, this is
not a part of sfc /scannow, rather it is being invoked by autorun. Simply
minimize the screen and allow sfc to continue.

If the above fails to resolve the issue, try a repair install as follows:



Be sure you are well backed up in case there is a problem from which you are
unable to recover. NOTE, while a repair install should leave your data
files intact, if something goes wrong during the repair install, you may be
forced to start over and do a clean install of XP. If you don't have your
data backed up, you would lose your data should that eventuality occur.



Boot from the CD. If your system is set to be able to boot from the CD, it
should detect the disk and give a brief message, during the boot up, if you
wish to boot from the CD press any key.



Once you have pressed a key, setup should begin. You will see a reference
asking if you need to load special drivers and another notice that if you
wish to begin the ASR (Automatic Recovery Console) depress F2. Just let
setup run past all of that. It will continue to load files and drivers.



Then it will bring you to a screen. Eventually, you will come to a screen
with the option to (1) setup Windows or (2) Repair Windows Installation
using the Recovery console.



The first option, to setup Windows is the one you want and requires you to
press enter. When asked, press F8 to accept the end user agreement. Setup
will then search for previous versions of Windows. Upon finding your
version, it will ask if you wish to Repair your current installation or
install fresh. Press R, that will run a repair installation. From there
on, follow the screens.
 
That didn't fix the problem any other suggestions? And it's been like that
for a long time.

Jeff
 
The recent issue part of the question only applies to the System Restore
response.

If SFC or Repair Install didn't resolve it, it would appear you have
something going on at system level.

See if any of the following applies:

Do you have a broadband connection, if yes, try the following courtesy of
MVP Terri Stratton:
NIC AND SLOW LOADING DESKTOP -

If you're running a DSL modem and have a Lan or high speed connection, try
changing the properties of it.

Go to start> connect to> show all connections>right click on Local Area
connection>scroll down and click on Properties.

Highlight "Internet protocol (TCP/IP)"

Click on properties button>click on the "use the following IP address" radio
button.

Add the following.

IP address:192.168.0.1 (or any in the accepted range)

Subnet Mask:255.255.255.0

Some connections won't allow this, so if you can't get a connection, remove
it.

If the above doesn't apply but you are on a network, go to Start\All
Programs\Accessories and the Command Prompt. At the prompt type "ipconfig"
without the quotes and press enter. Make note of the numbers.

Go to Start\Connect To, select "Show all connections" and select Local Area
Connection. Right click and select properties. Select "Internet Protocol
(TCP/IP)" and click properties, select "Use the following IP address" and
input the appropriate numbers you found earlier. When you exit that box, the
Subnet Mask numbers should input automatically.

Reboot and see if that resolves the issue.
 
Back
Top