Scattergraph

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have tried to enter some simple data, consisiting of height and weight
variables onto a scattergraph and have formatted the cells as "numbers":

Height Weight
1.56 53.00
1.52 40.00
1.42 41.00
1.61 45.00
1.62 47.00

The problem is that on the finished chart, the weight scale starts at 0 and
goes to 60 and it does this regardless of which axis I put the data on.

The Chart Wizard does not allow me to choose anything other that Automatic
for the Value (X) axis as this section is unhighlighted. All I can do is
unselect the Value (X) axis.

I have tried clicking on the X axis of the finished chart and altered the
minimum value to 30 under the Scale tab, but when I click OK there is no
change. On checking I find that the minimum value under the Scale tab is
still set at 0.

Any help and advice would be much appreciated.

Many thanks

Martin Coates
 
Yes, on Chart Wizard I clicked on XY (Scatter) and then Chart sub-type
"Scatter, Compares pairs of values.", this is the one with no lines joining
the points.
 
I had no trouble getting a range of 30 to 55 on the y-axis
Write to my private email and I will send you a file
 
When you change the minimum to 30, resist the urge to check the box to the
left of the altered value. Checking this box tells Excel to set the value
automatically.

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services
Tutorials and Custom Solutions
http://PeltierTech.com/
_______
 
Dear Jon

Thank you very much for your reply, which solved my problem and much
hair-pulling!

Yours

Martin Coates
 
Back
Top