G
Guest
Is there a driver available for Vista 64 for my SATAConnect 1205SA card?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R
Richard Urban
You have, of course, checked with the manufacturer of the SATA card. If they
haven't supplied it, it is likely not available as of yet.
--
Regards,
Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)
Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
haven't supplied it, it is likely not available as of yet.
--
Regards,
Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)
Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
G
Guest
Yes. All Adaptec has is an XP driver, which, I assume, is 32 bit and does not
work.
work.
T
Theo
Isn't the controller chip on that a Silicon
Image chip? If so, Silicon Image has Vista
drivers, both x86 & x64 on their site. I looked
up the SiL 3112 and you can find the results at:
http://www.siliconimage.com/support/downloadresults.aspx?pid=63&bios=0&drivers=0&sataraid=0&
Image chip? If so, Silicon Image has Vista
drivers, both x86 & x64 on their site. I looked
up the SiL 3112 and you can find the results at:
http://www.siliconimage.com/support/downloadresults.aspx?pid=63&bios=0&drivers=0&sataraid=0&