RRAS stops access to internet

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

As soon as I enable RRAS as VPN, the computer where I am setting up the VPN
can't access the internet anymore
Here is what I am trying to do:

---W2K3 server<----->LinksysRouter<--------->Cable Modem<------------>

I am trying to set up the W2K3 server for RRAS. The W2K3 Server already runs
as a DHCP server for other computers connected to the LinkSys Router ( all
computers are part of a domain).

As soon as I enable RRAS on the W2K3 Server nothing works.

I am new to this server stuff, can anybody help me with this?

Thanks
 
quoted from http://www.ChicagoTech.net
Can't access the internal server when remote client establishes VPN

Symptoms: Two offices are connected using a vpn. Both offices run W2K
servers, RAS & TS. When office A connects to Office B you can not connect to
office A from anywhere except from office B. You can not connect using TS,
or a vpn connection. In order to gain access to office A, you have to
connect to office B, disconnect the client in RAS, then you can connect to
office A.

Resolution: When establishing VPN to the office A, the routing table
changes. To fix this issue, disable the "Use default gateway" on the Office
A VPN server. Or modify the routing table manually.


--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.


Robert Lin, MS-MVP, MCSE & CNE

Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
www.guidescentral.com
Networking Tips
tip # 014


spanchag said:
As soon as I enable RRAS as VPN, the computer where I am setting up the VPN
can't access the internet anymore
Here is what I am trying to do:

---W2K3 server<----->LinksysRouter<--------->Cable Modem<------------>

I am trying to set up the W2K3 server for RRAS. The W2K3 Server already runs
as a DHCP server for other computers connected to the LinkSys Router ( all
computers are part of a domain).

As soon as I enable RRAS on the W2K3 Server nothing works.

I am new to this server stuff, can anybody help me with this?

Thanks
Click to expand...
 
Back
Top