rras doesn't route from a server in the same site as rras

[Guest]

After chaning rras to a new server I can ping remote sites from the rras
server but not from other servers in the same site as the rras server. Route
print on rras server looks like this
C:\Documents and Settings\benb-admin>route print

IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10002 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x10003 ...00 a0 cc 75 ce 0f ...... NETGEAR FA311/312 PCI Adapter #3
0x10004 ...00 04 e2 1e e0 7d ...... SMC EZ Card 10/100 Fast Ethernet PCI Netwo
Adapter #2
0x20005 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x30006 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x40007 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x50008 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x7000a ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
0x9000c ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 216.37.85.209 216.37.85.222 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
200.200.11.0 255.255.255.0 200.200.200.15 200.200.200.4 1
200.200.12.0 255.255.255.0 200.200.200.15 200.200.200.4 1
200.200.13.0 255.255.255.0 200.200.200.226 200.200.13.247 1
200.200.13.247 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.13.255 255.255.255.255 200.200.13.247 200.200.13.247 50
200.200.14.0 255.255.255.0 200.200.200.229 200.200.14.249 1
200.200.14.249 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.14.255 255.255.255.255 200.200.14.249 200.200.14.249 50
200.200.15.0 255.255.255.0 200.200.200.227 200.200.15.244 1
200.200.15.244 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.15.255 255.255.255.255 200.200.15.244 200.200.15.244 50
200.200.16.0 255.255.255.0 200.200.200.228 200.200.16.242 1
200.200.16.242 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.16.255 255.255.255.255 200.200.16.242 200.200.16.242 50
200.200.17.0 255.255.255.0 200.200.200.241 200.200.17.249 1
200.200.17.249 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.17.255 255.255.255.255 200.200.17.249 200.200.17.249 50
200.200.18.0 255.255.255.0 200.200.200.4 200.200.200.4 1
200.200.19.0 255.255.255.0 200.200.200.231 200.200.19.248 1
200.200.19.248 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.19.255 255.255.255.255 200.200.19.248 200.200.19.248 50
200.200.20.0 255.255.255.0 200.200.200.4 200.200.200.4 1
200.200.200.0 255.255.255.0 200.200.200.4 200.200.200.4 20
200.200.200.4 255.255.255.255 127.0.0.1 127.0.0.1 20
200.200.200.226 255.255.255.255 200.200.13.247 200.200.13.247 1
200.200.200.227 255.255.255.255 200.200.15.244 200.200.15.244 1
200.200.200.228 255.255.255.255 200.200.16.242 200.200.16.242 1
200.200.200.229 255.255.255.255 200.200.14.249 200.200.14.249 1
200.200.200.231 255.255.255.255 200.200.19.248 200.200.19.248 1
200.200.200.240 255.255.255.255 127.0.0.1 127.0.0.1 50
200.200.200.241 255.255.255.255 200.200.17.249 200.200.17.249 1
200.200.200.242 255.255.255.255 200.200.200.240 200.200.200.240 1
200.200.200.255 255.255.255.255 200.200.200.4 200.200.200.4 20
216.37.66.194 255.255.255.255 216.37.85.209 216.37.85.222 20
216.37.72.130 255.255.255.255 216.37.85.209 216.37.85.222 20
216.37.72.138 255.255.255.255 216.37.85.209 216.37.85.222 20

Notice that the Interface column has incorrect information. The server that
produced this "route print" has two nics. The lan interface is 200.200.200.4
mask 255.255.255.0 and a wan interface of 216.37.85.222.

I have uninstalled rras and reinstalled without any improvement. We have
installed rras perhaps 100 times beginning with NT4 version. But we have
never seen this symptom.

Any ideas how to correct this condition?