rras and terminal server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I manage a computer using terminal server. I am trying to setup rras so that I can setup a dod conection with another server in another location. When I enable the routing and remote acces service I get kicked out of terminal server and I cant connect until I stop the service. This machine is connected to a cisco router and has 2 NICS. I am not using a dial-up connection.
 
this may help. quoted from http://www.chicagotech.net
Can't ping external NIC while RRAS is active
Symptoms: After you configure the RRAS as a VPN server with two or more
network adapters, pinging the external network adapter does not work. This
behavior occurs only while RRAS is running and is by design to tighten
security on the Internet VPN server.
Resolution: To allow pinging to and from the external NIC, add Inbound and
Outbound filters to the adapter to allow Internet Control Message Protocol
(ICMP) packets to be processed on the adapter. To do this, go to Routing and
Remote Access>IP Routing>General. In the right pane, right-click the adapter
that has been configured as the external adapter, and then click
Properties>Input Filters>Add. In the Protocol box, click ICMP. Click Output
Filters, and then repeat the previous three steps.
--
For more and other information, go to http://www.chicagotech.net
Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.chicagotech.net
This posting is provided "AS IS" with no warranties.
 
Do you have filters enabled while setting up RRAS? What is the OS you are
using?

Thanks,
Sharoon

lbkrobert said:
I manage a computer using terminal server. I am trying to setup rras so
Click to expand...
that I can setup a dod conection with another server in another location.
When I enable the routing and remote acces service I get kicked out of
terminal server and I cant connect until I stop the service. This machine is
connected to a cisco router and has 2 NICS. I am not using a dial-up
connection.
 
Back
Top