O
orangeKDS
I have a small network: 2PCs and Amiga. (I'll call them A,B,C)
The 2 PCs (A,B) have winXP and Ethernet cards and they are connected to
a switch with UTP cable. Amiga (C) is connected to one of them (B) with
nullmodem cable (mdmcisco.inf ras).
Here are the IPs:
1st PC (A) 10.1.86.138 (IIRC)
2nd PC (B) 10.1.92.196 192.168.1.1
Amiga (C) 192.168.1.2
I CAN ping:
A,C from B
B from A,C
but I cannot ping:
A from C
C from A
here is output from route print >C:file (done on B)
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...08 00 46 57 43 a9 ...... Intel(R) PRO/100 VE Network Connection
- Packet Scheduler Miniport
0x20004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 10.1.0.2 10.1.92.196
20
10.1.0.0 255.255.0.0 10.1.92.196 10.1.92.196
20
10.1.92.196 255.255.255.255 127.0.0.1 127.0.0.1
20
10.255.255.255 255.255.255.255 10.1.92.196 10.1.92.196
20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.1
1
192.168.1.1 255.255.255.255 127.0.0.1 127.0.0.1
50
192.168.1.2 255.255.255.255 192.168.1.1 192.168.1.1
1
192.168.1.255 255.255.255.255 192.168.1.1 192.168.1.1
50
224.0.0.0 240.0.0.0 10.1.92.196 10.1.92.196
20
224.0.0.0 240.0.0.0 192.168.1.1 192.168.1.1
50
255.255.255.255 255.255.255.255 10.1.92.196 10.1.92.196
1
Default Gateway: 10.1.0.2
===========================================================================
Persistent Routes:
None
BTW, cable modem is also connected to switch and A,B can connect to
Internet with it (default gateway is from ISP)
I need computers A and C to SEE each other.
Any reply is highly appreciated.
The 2 PCs (A,B) have winXP and Ethernet cards and they are connected to
a switch with UTP cable. Amiga (C) is connected to one of them (B) with
nullmodem cable (mdmcisco.inf ras).
Here are the IPs:
1st PC (A) 10.1.86.138 (IIRC)
2nd PC (B) 10.1.92.196 192.168.1.1
Amiga (C) 192.168.1.2
I CAN ping:
A,C from B
B from A,C
but I cannot ping:
A from C
C from A
here is output from route print >C:file (done on B)
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...08 00 46 57 43 a9 ...... Intel(R) PRO/100 VE Network Connection
- Packet Scheduler Miniport
0x20004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 10.1.0.2 10.1.92.196
20
10.1.0.0 255.255.0.0 10.1.92.196 10.1.92.196
20
10.1.92.196 255.255.255.255 127.0.0.1 127.0.0.1
20
10.255.255.255 255.255.255.255 10.1.92.196 10.1.92.196
20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.1
1
192.168.1.1 255.255.255.255 127.0.0.1 127.0.0.1
50
192.168.1.2 255.255.255.255 192.168.1.1 192.168.1.1
1
192.168.1.255 255.255.255.255 192.168.1.1 192.168.1.1
50
224.0.0.0 240.0.0.0 10.1.92.196 10.1.92.196
20
224.0.0.0 240.0.0.0 192.168.1.1 192.168.1.1
50
255.255.255.255 255.255.255.255 10.1.92.196 10.1.92.196
1
Default Gateway: 10.1.0.2
===========================================================================
Persistent Routes:
None
BTW, cable modem is also connected to switch and A,B can connect to
Internet with it (default gateway is from ISP)
I need computers A and C to SEE each other.
Any reply is highly appreciated.