routing question

  • Thread starter Thread starter cdoc
  • Start date Start date
C

cdoc

Hello
I have a routing question:
Here is my setup:

PC1

Network Card on LAN with access to internet 192.168.0.2
Firewire connection to PC2 192.168.2.1

PC2
Firewire connection to PC1 192.168.2.2(set gateway to 192.168.2.1)

PC1 can get to the internet fine.
Can ping back back and forth from PC1 to PC2 through firewire interface.

I am sure that I need to add a route entry to PC1 but I am not sure what
that would be. I have done this in the past but now cannot remember.
I tried to bridge the connections on PC1 but that prevented killed my
connection from PC1 to PC2 all together.
Any help on this is greatly appreciated!
 
Assuming your question is "how does PC 2 get to the internet via pc1?" than
you need to enable Internet Connection Sharing on PC1. PC1 should have a
default gateway on the 192,168.0 network but not on the 192.168.2 network.
PC2 should have a default gateway of 192.168.2.1.

...kurt
 
Back
Top