Routing Question.

  • Thread starter Thread starter Steve
  • Start date Start date
S

Steve

I have a Win2k Server Setup with RRAS. I Am trying to route between two
different networks. There is a server in the remote network that i am
trying to establish a connection with.


Nic1 has ip of: 192.168.1.xxx
Nic 2 has ip of 192.168.0.xxx

From the rras server i am able to ping other computers in the remote
network. If i try to setup a client to use that rras server as its gateway
to get to a server in the other network, it is unreachable. Pings time out
from the client, but not the server.

Any help would be appreciated.

Steve,
 
have enabled ip routing?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Yes i do have it enabled.

Robert L said:
have enabled ip routing?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
Click to expand...
 
The server you are trying to ping in the remote network either needs to
have its default gateway pointing to the local IP address of the RRAS
server OR have a specific route back to the subnet where the client is.


Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.
 
Back
Top