Routing between two networks

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have two separate networks: 10.140.x.x using as gateway 10.140.1.25 and a
second network 192.168.x.x using as gateway 192.168.1.1

The Win2003 Server has 2 NICs, one with the address 192.168.1.10 and another
with the address 10.140.1.10. Each NIC is connected to a separate switch.

Hiow can I see a computer from the 10.140.x.x network from a computer form
the 192.168.x.x network?

Thank you.
 
You may want to enable RRAS. This how to may help,

How to setup vpn on 2003 as routerRight-click the server and then click Configure and Enable Routing and Remote Access ... of the DHCP Relay Agent with the IP address of your DHCP server". ...
http://www.howtonetworking.com/VPN/2003vpn1.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have two separate networks: 10.140.x.x using as gateway 10.140.1.25 and a
second network 192.168.x.x using as gateway 192.168.1.1

The Win2003 Server has 2 NICs, one with the address 192.168.1.10 and another
with the address 10.140.1.10. Each NIC is connected to a separate switch.

Hiow can I see a computer from the 10.140.x.x network from a computer form
the 192.168.x.x network?

Thank you.
 
Back
Top