router gateway failure/WMI failure/repository rebuild failure

  • Thread starter Thread starter Bobby
  • Start date Start date
B

Bobby

Turn off computer and cable modem. Unplug the router (AC)
and wait 5+ minutes. Now plug in the router and hit
the "reset" button. Now turn on the cable modem and
computer. Using the linksys IP and password you should
now be able to connect. Now you will need to reconfigure
all the settings, but at least it should work. Also, make
sure your firmware is the latest version. You can
download from Linksys website.

Good luck...
 
This is likely related to the blaster worm. Post the results of typing the
following command at the command prompt

sc queryex RPCSS
 
-----Original Message-----
This is likely related to the blaster worm. Post the results of typing the
following command at the command prompt

sc queryex RPCSS



--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


Bobby said:
Turn off computer and cable modem. Unplug the router (AC)
and wait 5+ minutes. Now plug in the router and hit
the "reset" button. Now turn on the cable modem and
computer. Using the linksys IP and password you should
now be able to connect. Now you will need to reconfigure
all the settings, but at least it should work. Also, make
sure your firmware is the latest version. You can
download from Linksys website.

Good luck...
Click to expand...


.
Click to expand...
 
Back
Top