Rounter service

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi all,

My network is like this

My Domain 10.20.0.1 Subnet 255.255.255.0
Sister company domain 10.10.0.1 Subnet 255.255.252.0

we are using windows 2k server.

how can i allow my client to ping the other network from his/her station.


Regards,


Thank you in advance
 
That depends on how they are connected. Ping means nothing,..you could ping
but still not do anything else,..likewise you might be able to do everything
else and yet not ping,...so it doesn't mean much. Being able to ping only
means that ICMP works and that you can actually ping.
 
we need more information to help. how do you connect these two domainds? this how to route may help, http://www.howtonetworking.com/routing.htm

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
I recommend Brinkster for web hosting!

Hi all,

My network is like this

My Domain 10.20.0.1 Subnet 255.255.255.0
Sister company domain 10.10.0.1 Subnet 255.255.252.0

we are using windows 2k server.

how can i allow my client to ping the other network from his/her station.


Regards,


Thank you in advance
 
Back
Top