Revive a dead CF card

  • Thread starter Thread starter Siddhartha Jain
  • Start date Start date
S

Siddhartha Jain

Is there any to try and revive a dead CF card? When I plug the card in
my Canon 300D, it throws "Err 02". When I plug the CF card in the card
reader connected to my linux box, it detects the make and capacity and
then starts throwing errors saying "Couldn't read logical block 0" and
then the same for block 1,2,3, .....

Is there some way to force filesystem creation on this CF card?

Thanks,

- Siddhartha
 
Is there any to try and revive a dead CF card? When I plug the card in
my Canon 300D, it throws "Err 02". When I plug the CF card in the card
reader connected to my linux box, it detects the make and capacity and
then starts throwing errors saying "Couldn't read logical block 0" and
then the same for block 1,2,3, .....

Is there some way to force filesystem creation on this CF card?
Click to expand...

under Linux, do:

dd if=/dev/zero of=/dev/{yourdevice} bs=8k

Then sit back and wait. If that fails, it's time to throw the card away.
If it finishes, it will have zeroed out the entire card, but will have done
something even better along the way: As the card goes along, if a write
fails, it will remap that sector out to a reserved chunk.

Once that's done, create a partition on it of the correct type, plug it in
your camera, and format it.

steve
 
Marius said:
When you have a dead CF-card:
and are a Linux-user.....
try Linux version of Recovery Manager 1.5 on
http://www.vaiosoft.com/products/recoverymanager.html
and test it

When the card doesn't revive ... don't throw away.
Claim a new card, because most of the memorycards have a ten year
guarantee

Marius
Click to expand...
I had the same problem with a Sandisk 512 mb card and I found that if I
installed it into a Hp 2210 it would read the corrupt card. I then
reformatted using a pocket pc utility I downloaded from the web. Hope this
helps..
 
Is there any to try and revive a dead CF card? When I plug the card in
my Canon 300D, it throws "Err 02". When I plug the CF card in the card
reader connected to my linux box, it detects the make and capacity and
then starts throwing errors saying "Couldn't read logical block 0" and
then the same for block 1,2,3, .....

Is there some way to force filesystem creation on this CF card?

Thanks,

- Siddhartha
Click to expand...

If you're using Windows, try Zero Assumption Digital Image Recovery...
http://www.z-a-recovery.com/
It's free, and works for me.
 
The problem with Windows is that you cannot read the card with the card
reader to try any recovery.
Click to expand...
That's not what Siddhartha said.
Give it a try; it's worked for me in such situations.
 
Back
Top