Reverting RAID 0 back to single drives

  • Thread starter Thread starter Marie
  • Start date Start date
M

Marie

I have a new Dell Dimension 8300 with 2 120 GB hard drives configured
for RAID 0. I'm having second thoughts about putting my data in
jeopardy with this type of setup. I haven't put any of my own programs
or data on this new computer. How can I revert RAID 0 back to 2 single
drives? Thanks for your help!
 
Marie said:
I have a new Dell Dimension 8300 with 2 120 GB hard drives configured
for RAID 0. I'm having second thoughts about putting my data in
jeopardy with this type of setup. I haven't put any of my own programs
or data on this new computer. How can I revert RAID 0 back to 2 single
drives? Thanks for your help!
Click to expand...

Should be able to access the RAID controller settings through BIOS.
Deletion/Creation of RAID arrays are data destructive. All programs and data
will be wiped clean. Once you've eliminated the array, you'll then have to
partition and format each drive. I have highpoint raid onboard and I use
CTL-H to access it as system is booting. You may be able to access yours in
a similar fashion.

Ron
 
Back
Top