I went into the control panel,,,power options,,,and then to hibernate tab
and unclicked the enable hibernation...is this ok?? is that the same as
standby??? and then I went to power schemes and click "never" on the turn
off monitor... will this help...I already have updated all my drivers about
a month ago...I have had this problems for a while....computer store said
they couldnt find anything wrong ...until I just mentioned this about
slowing of the computer after being on all day long....he then said
resources,,, also stating what you did about older windows 9x having the
problems not xp...
so far nothing has came up with all the scans I have done for viruses or
anything else...the only thing I havent done and am a little worried about
is that memory test??? on jones web site....looks more advance than I feel!!
any suggestion on that...
The memory test is easier than you think. Just follow the directions. Tip:
Set it to run when you're not going to be at the computer for a bit so it
can do its thing unencumbered.
Hibernate and standby are two different things. Standby the system kicks
back - some devices are "disengaged" (if you will) to allow lower power
consumption. When you wake the computer up, the devices and drivers don't
always kick back in 100%.
Hibernate stores a system state in a special and shuts the computer down.
When you start back up, there is a semi-normal load of Windows and then the
saved system state is restored. You can still get into trouble with
hibernate though as most systems are set to standby before proceeding to
hibernate. It's really standby that's the kicker though.
Spend some time on the "msconfig" section of Jupiter Jones' page. Trim down
start up to items necessary for your hardware devices and a few
applications that you use everyday.
Also, a little oddball of a setting but it might help is to uncheck the
option to search for network drives at startup. You'll find this in Folder
Options> View. It's one of the very first options that can be selected.
WIA service - for cameras and scanners - can also cause an overall
slowdown. You can try disabling this in Administrative tools> services.
Right click on it and select Properties. Change startup type to disabled.
Restart system and test. If you find this is detrimental to your use of
camera or scanner (usually isn't), then step the startup type up to manual.