Resolution Problems

  • Thread starter Thread starter Rusty1971
  • Start date Start date
R

Rusty1971

I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me.
I am running, Vista Business 32bit, Intel Duo 6750, Gigabyte P35-DS3P MB,
XFX 8800GT 512mb (Factory OC), 2GB Kingston HyperX DDR2, Viewsonic VX2235wm
Monitor. (That should be enough info)
Everything had been working fine, but without any changes to hardware,
software or drivers I now have resolution problems.
Firstly, when I boot my pc up it all goes well until just after the “Windows
Vista†logo at the bottom of the screen comes up (during boot) the monitor
goes into standby mode. Now the only way I have found to get my monitor out
of this is to unplug the DVI cable from the back of my tower and plug in back
in. The monitor then runs as normal – SO THATS ONE PROBLEM.
Secondly, when the above problem first happened (and this is still
happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my
Video Card can easily handle this. (Which it had been doing). But now I can
only achieve 1024 x 768.

So I really would like to know if anyone can put there finger on what the
problem may be. Oh yeah, I have uninstalled, updated, reinstalled drivers.
Currenly using the 169.25 Nvidia Driver.

Thank you in advance.
 
Hi

I have similar problem on Vista Business 32bit, Intel Duo 6750, MSI P35Neo3,
MSI 8800GT 512mb (Factory OC), 2GB Goodram 800MHz. When I try to install
driver for VGA, the instalation stop in the middle of process. The after some
time it went to the end. But after starting Windows a can see only status bar
and then the PC freeze for a while and after around 30sec does to the blue
screen.

Could somebody help me with this problem

Thanks
 
Have you contacted MSI?

Peter Tolarovic said:
Hi

I have similar problem on Vista Business 32bit, Intel Duo 6750, MSI
P35Neo3,
MSI 8800GT 512mb (Factory OC), 2GB Goodram 800MHz. When I try to install
driver for VGA, the instalation stop in the middle of process. The after
some
time it went to the end. But after starting Windows a can see only status
bar
and then the PC freeze for a while and after around 30sec does to the blue
screen.

Could somebody help me with this problem

Thanks
Click to expand...
 
Back
Top