Reserve look up problem Please help

  • Thread starter Thread starter Mr555
  • Start date Start date
M

Mr555

Hi everyone.

We been having e-mail problem send to priticular domain, I
telnet to their domain, the domain reply was cannot
resolve us (203.1.1.2 for example),I had a look on the
question. we have a antivirus SMTP gateway(smtp.test.com).
all incoming e-mail get scan before it will pass to our
exchange 2000 server to process. All outbound e-mail are
sent out directly to the destination Server. the IP
address will get translate from internal private IP eg
192.1.1.2 to public IP 203.1.1.2

We have 2 external DNS
Can we set the DNS 203.1.1.2 (mail translate IP) is
(smtp.test.com) or do we have to do this on the Firewall ?
DNSStuff.com. and discovered there was a reserve lookup
issue.


Thanks
 
In
Mr555 said:
Hi everyone.

We been having e-mail problem send to priticular domain, I
telnet to their domain, the domain reply was cannot
resolve us (203.1.1.2 for example),I had a look on the
question. we have a antivirus SMTP gateway(smtp.test.com).
all incoming e-mail get scan before it will pass to our
exchange 2000 server to process. All outbound e-mail are
sent out directly to the destination Server. the IP
address will get translate from internal private IP eg
192.1.1.2 to public IP 203.1.1.2

We have 2 external DNS
Can we set the DNS 203.1.1.2 (mail translate IP) is
(smtp.test.com) or do we have to do this on the Firewall ?
DNSStuff.com. and discovered there was a reserve lookup
issue.


Thanks
Click to expand...

Generally, unless you have explicitly asked your ISP to do so, you do not
have your reverse lookup delegated to your DNS server.
You will either need your ISP to create the reverse lookups on their DNS
because they own the reverse lookup authority on your IP or have them
delegate the reverse lookup to you. If you own a block of IPs they will
usually have no problem with this. All you need to do is create a reverse
lookup zone using your NetBlock ID, then create the PTR records in that
zone.
 
You will need to have your ISP create a PTR record for your public IP address.

Thank you,
Mike Johnston
Microsoft Network Support
--

This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the
terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this message are best directed to the newsgroup/thread from
which they originated.
 
Back
Top