reply to rich barry

  • Thread starter Thread starter Gilbert
  • Start date Start date
G

Gilbert

Yes, I'm afraid I started initially to install WinXP using
my existing configuration, with CPU set at 936Mhz. Then I
had the "system halt" blue screen, and after several look
around, i decided to try without O/C my processor, and
then, the installation was able to finish OK.
 
Gilbert, thanks for the reply. You can probably raise the FSB in small
increments until you hit the XP wall.
 
Oooops
I made a mistake in creating this new topic "reply to rich barry" ... I'm sorry ...
Anyway, I'll go back in the original subject.
I already tryed to raise the FSB in small increment, without success. I will double check this afternoon, but I'm afraid on the issue. Anyway, thank's for the advice.
What I plan to do, if the duck is still alive, is to make a new XP install, with no overclock, and then, to test the O/C setting ...
Thank you to go back on the original subject/topic, and best regards.
Gilbert

----- Rich Barry wrote: -----

Gilbert, thanks for the reply. You can probably raise the FSB in small
increments until you hit the XP wall.
 
Back
Top