Well if its a brand new model then its possible you might get a new
one but since there seem to be zillions of returns almost right away
with MBs - you always see posts everywhere from people having problems
whether real or imagined - I think even then you probably wont.
That's true. I was hoping with it being a brand new model, I would get a
new one. I personally don't find it ethical for Intel to send someone a
replacement item that is actually second-hand but had been repaired; even
although the item may work
Yeah me too. I defintely wanted a new one after all the problems Ive
had with boards recently. In the "old days" when I was running Intel
stuff around the K-6 era , I never had problems with any MBs. Since
then EVERY single board Ive had - has developed qeird quirks or melted
down after 1-2 years.
Yes, agreed. I had an old Asus P3B-F I put in a server I built for someone,
that was five years ago. I called him a month or so ago and asked about his
server, it's still going. I think QA is passing boards that would have
failed a few years ago.
With all the weird quirks and talk about bad caps Im paranoid that I
would be getting a subtle problem that they didnt detect.
Yes, I know what you mean.
I bought a refurb nforce board - right now Im having some slight
problems now that Ive owned it for a a few months. Mainly stuttering
sound (sblive) and the time setting seems to go wonky after a day or
so but then Ive had TONS of worms and trojan infections that I keep
cleaning off so I really cant blame the board until I go through my
whole system and reinstall win xp clean.
Stuttering problems? That's a problem I read a lot about on AMD CPU boards.
I suppose it is possible a Trojan or Worm is causing the sound to slow down,
maybe a re-format may be in order?
Got a replacement for an ABIT 333R - which developed huge problems .
Yes, my first Abit was a BP6, the dual processor Celeron. I don't think
I've ever lost so much sleep to a motherboard. I used dual 466Mhz CPUs with
that one, it was horrible. I used NT with it and the thing froze in the
BIOS sometimes at boot, or if it didn't so that, it didn't work with several
manufacturers of RAM.
The *BEST* dual processor M/B I had, and I regret selling it, was the Intel
OR840. I can honestly say, that thing was Titanium solid! It was just the
best. Unfortunate thing was, it only went up to Intel P3 933Mhz.
The refurb replacement had a random hanging problem which I think
after tearing my hair out I think I fixed but Im not 100% sure until I
test it thoroughly with some intensive DVD ripping tests. Its
defintely better now but Ive said that many times before only to see
it pop up again.
Ach! What a nightmare! That is what I'm afraid of with Intel, they send me
one with another problem. I'm definitely not finalizing my machine (neatly
routing wires, installing all the devices) until that replacement board I
get works in all areas.
An ABIT 333 I replaced for a neighbor - he had the classic cant boot
up/post problem when we first got it. I traced it to a loose/no
contact clear CMOS jumper which I fixed . However once in a while it
still does it.
Terrible. I usually only buy Asus or Intel motherboards, they have proven
to be the most stable. Of course, I say that and my D875PBZ is faulty, with
respect to the RAID controller. I'm thinking about trying a SuperMicro
board, any experience with those?
So it seems like alot of these boards test OK but defintely have some
subtle quirks that probably caused the board to be returned. You can
work around it or tear your hair out to try to find THE fix but there
are subtle quirks.
To be honest, I'm less inclined to use work arounds unless I have to. I
find it difficult using a board I know has a fault. I'd sooner sell it on
eBay and state that it has XXX problem and buy a new one, but a different
brand.
@drian.
