Replace rollers on HP psc1210? or get a new printer?

  • Thread starter Thread starter ron f.
  • Start date Start date
R

ron f.

I have a HP psc1210 and its been working great for the first several
months but the rollers either aren't picking up the paper anymore or
feeding 4-5 sheets at a time. I've cleaned them, it works for a day or
two but soon goes back to its bad eating habits. I thought I finally
found a printer that feeds reliably and this crap happens :((
Is there any way to replace the rollers? I've been printing ALOT
lately and I basically need a workhorse.
 
ron f. said:
I have a HP psc1210 and its been working great for the first several
months but the rollers either aren't picking up the paper anymore or
feeding 4-5 sheets at a time. I've cleaned them, it works for a day or
two but soon goes back to its bad eating habits. I thought I finally
found a printer that feeds reliably and this crap happens :((
Is there any way to replace the rollers? I've been printing ALOT
lately and I basically need a workhorse.
Click to expand...

Hold sandpaper against the rollers as they turn - then clean with alcohol

HTH

Martin
 
Hold sandpaper against the rollers as they turn - then clean with alcohol

HTH

Martin
Click to expand...

ok i tried this and it worked great for a while but then again after
about 200 sheets it started jamming and picking up several sheets at a
time. I'm gonna go to the store and look for replacement.. This
printer was cheap anyway ($99) so I guess I got what I paid for.
 
Back
Top