remote desktop

  • Thread starter Thread starter browser
  • Start date Start date
B

browser

Hi all,
my clients xp pro can connect server 2003 with remote desktop but my server
2003 can not connect client xp pro.
what is problem. AD is working very well.network is OK.
thanks...
 
browser said:
Hi all,
my clients xp pro can connect server 2003 with remote desktop but my server
2003 can not connect client xp pro.
what is problem. AD is working very well.network is OK.
thanks...
Click to expand...

- What operating system does your client run?
- What internal firewall do you have?
- What virus scanner do you have?
- Is Remote Desktop enabled on your client PC?
- What message do you get when trying to make an RD connection?
- What do you get when you run this command from a
Command Prompt on the server?
telnet SomeClientName 3389
 
my operating system is windows 2003 server standart
client operating system is windows xp pro
firewall none
antivirus progra:norton corporate
client remote desktop is enabled
only disconnected
message is: Could not open connection to the host, on port 3389: Connection
failed

thank you very much,Pegasus
 
browser said:
my operating system is windows 2003 server standart
client operating system is windows xp pro
firewall none
antivirus progra:norton corporate
client remote desktop is enabled
only disconnected
message is: Could not open connection to the host, on port 3389: Connection
failed

thank you very much,Pegasus
Click to expand...

The telnet.exe message means that you do not have a Remote
Desktop server listening on the default RD port 3389. This can
be caused by one of the following:

a) Incorrect IP address
b) Terminal Services not running
c) A firewall is blocking access on port 3389
d) Someone changed the default port

a), b) and c) are by far the most likely candidates. a) and b) are
easily checked from the Command Prompt. c) is often caused
by firewalls that are integrated with virus scanners, e.g. with Trend.
ZoneAlarm is another prime suspect.
 
OK,
what can I do? i can not ping client but client ping server.
3-4 days ago all things were normal.
please help me.
note:i can not speak english but i can read very well.
 
browser said:
OK,
what can I do? i can not ping client but client ping server.
3-4 days ago all things were normal.
please help me.
note:i can not speak english but i can read very well.
Click to expand...

It is likely that you have a firewall that blocks your pinging
packets as well as your Remote Destkop packets. I cannot
do anything about your firewall - you have to identify and
turn it off yourself. What virus scanner do you use?
 
browser said:
i use norton antivirus corporate edition and i load client with norton
corporate.
Click to expand...

I'm not familiar with this product, hence I do not know
if it has an integrated firewall. I recommend you check
the Norton FAQs for tips on how to turn off any firewall
you might have.
 
Have you installed Service Pack 2 on Windows XP? It became available
recently and a firewall in enabled, which will block your incoming remote
desktop connection from the server. Open Control Panel, go to Windows
Security Center, click Windows Firewall, and click to turn it off, then
click ok and try connecting again.
 
i found the problem source.
i dont attach the Adsl modem,so server 2003 can ping the xp pro client.
what can i do?
thanks...
 
No,i can not load sp2.
only clean install...
xp pro pings server 2003 but server 2003 can not ping xp pro.
on server 2003 cmd promt net view:
w2k
bil1

on xp pro cmd promt net view:
can not use this workgroup list...

thank you very much
 
Back
Top