Remote Desktop Issue with D-Link DI 614+ Gatway Router

  • Thread starter Thread starter test
  • Start date Start date
T

test

Hi...

Trying to set up Remote Desktop with D-Link DI 614+ Gateway Route

The problem:

Eveytime my computer reboots my ISP assigns a new ip address DHCP???

Does anyone know how to solve this issue if my ISP will not allow static ip
addresses?

Please advise,

Jeff
 
Since you have dynamic public internet addresses, look at No-IP.com which maps an alias (usually of
your choice) to a DHCP assigned IP address. A small program runs on your PC and contacts the
No-IP.com servers on a periodic basis. The server then maps the IP of your PC to the alias and
propagates that over the public internet. It works very well for me and its FREE.... Go to
http://www.no-ip.com for help. Additional like services, some FREE and some $$$$, can be found on
this page...

http://www.remotenetworktechnology.com/ow.asp?Remote_Network_Home/Connections

You would call the remote PC using the alias...

Note, its best to be using a static private LAN IP address so your port forwarding scheme does not
get negated by any possible reboot/restarts of the remote PC.

Make sure you forward TCP Port 3389 through the router also...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
Back
Top