Remote Desktop Connect Not Working outsie LAN

  • Thread starter Thread starter Ramon Smitherman
  • Start date Start date
R

Ramon Smitherman

I am able to connect sucessfully to WIN XP Pro computer usine RDC. However
I am unable to connect from outside the LAN.

The firewall (LinkSYS Router has nothing turned on and the Windows Firewall
is set to work with RDC based on instructions from Microsoft.

My configuration looks like this:


/_/ ----internet--------> | Cable Modem| ------>|Linksys Rounter|<-----
Vonage Phones
|
|
|Computer C|
|

--------------

| Wireless AP|

---------------

| |

| |
-------------
---------------
|
Computer A| | Computer B|
| XP
Pro | | XP Home |


Computer B can Access A no problem
Computer C can not access at all

I have tried using IP address of Computer A (192.168.xxx.xx)
I have tried using the extrernal IP of Computer A (68.123.xxx.xx)
I have tried tacking on the port 3389 at the end of each address
(192.168.xxx.xx:3389)

But I get the same "can't access message everytime.

Is there an issue passing through the cable modem to the linksys to the
wireless access point.
 
do a simple test. Can you telnet the port 3389?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I am able to connect sucessfully to WIN XP Pro computer usine RDC. However
I am unable to connect from outside the LAN.

The firewall (LinkSYS Router has nothing turned on and the Windows Firewall
is set to work with RDC based on instructions from Microsoft.

My configuration looks like this:


/_/ ----internet--------> | Cable Modem| ------>|Linksys Rounter|<-----
Vonage Phones
|
|
|Computer C|
|

--------------

| Wireless AP|

---------------

| |

| |
-------------
---------------
|
Computer A| | Computer B|
| XP
Pro | | XP Home |


Computer B can Access A no problem
Computer C can not access at all

I have tried using IP address of Computer A (192.168.xxx.xx)
I have tried using the extrernal IP of Computer A (68.123.xxx.xx)
I have tried tacking on the port 3389 at the end of each address
(192.168.xxx.xx:3389)

But I get the same "can't access message everytime.

Is there an issue passing through the cable modem to the linksys to the
wireless access point.
 
I am not sure how to telnet....
do a simple test. Can you telnet the port 3389?

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I am able to connect sucessfully to WIN XP Pro computer usine RDC. However
I am unable to connect from outside the LAN.

The firewall (LinkSYS Router has nothing turned on and the Windows Firewall
is set to work with RDC based on instructions from Microsoft.

My configuration looks like this:


/_/ ----internet--------> | Cable Modem| ------>|Linksys Rounter|<-----
Vonage Phones
|
|
|Computer C|
|

--------------

| Wireless AP|

---------------

| |

| |
-------------
---------------
|
Computer A| | Computer B|
| XP
Pro | | XP Home |


Computer B can Access A no problem
Computer C can not access at all

I have tried using IP address of Computer A (192.168.xxx.xx)
I have tried using the extrernal IP of Computer A (68.123.xxx.xx)
I have tried tacking on the port 3389 at the end of each address
(192.168.xxx.xx:3389)

But I get the same "can't access message everytime.

Is there an issue passing through the cable modem to the linksys to the
wireless access point.
 
Back
Top