Registry Filter

  • Thread starter Thread starter Mike Warren
  • Start date Start date
M

Mike Warren

I have two questions regarding the registry filter.

1/ Is it possible to use the registry filter to allow persistence of a
whole branch?

for example, I would like to persist any changes to

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces

This would allow future interfaces to work.


2/ Also, does anyone have a list of the keys required to allow ELO
touch screens to persist their calibration data?

I have run RegMon on a calibration and there are hundreds of changes.
Even looking only at the entries made by the ELO calibration program
directly, there are a lot of entries with device IDs, which I'm
guessing would change if I used a different touch screen.

If the answer to my first question is "yes", then I expect it would be
possible to make this work by adding

HKLM\SYSTEM\CurrentControlSet\Enum\USB
 
Good news and bad news.
HKLM\SYSTEM\CurrentControlSet\Enum\USB
Click to expand...

Adding this to the registry filter does allow the ELO touch screen
calibration settings to persist.


This one, which is supposed to persist TCP/IP changes to network
adaptors doesn't work.
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces
Click to expand...


I did this based on Konstantin's blog entry here:

http://km-dev.blogspot.com/2007/05/xpe-tip-26-changing-ip-with-ewffbwf-o
n.html

I have changed the start from kernel to SCM with:

HKLM\SYSTEM\ControlSet001\Services\Tcpip\Start=2

Has anyone here had luck getting this to work?
 
Mike said:
This one, which is supposed to persist TCP/IP changes to network
adaptors doesn't work.
Click to expand...

I just changed that to:

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip

and it seems to work.

Using these settings will open up a few more registry keys than is
necessary, but I can't see any serious problems with it so far.
 
Back
Top