The Windows XP CD is bootable and contains all the tools
necessary
to partition and format your drive. Follow this procedure
and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your
peripheral hardware
devices, except the monitor, mouse and
keyboard, before installing XP.
1. Open your BIOS and set your "CD Drive as the first
bootable device".
===> Accessing Motherboard BIOS
===>
http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot
your computer.
3. You'll see a message to boot to the CD....follow the
instructions.
4. The setup menu will appear and you should elect to
delete all the existing
Windows partitions, then create a new partition,
then format the primary
partition (preferably NTFS) and proceed to install
Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. ==> Immediately after installing Windows XP, turn on
XP's Firewall.
==>
http://www.microsoft.com/security/protect/
7. After Windows XP is installed, visit the Windows
Update website
and download the available "Critical Updates".
8. After installing the critical updates, be sure and
visit the support website
of the manufacturer of the computer to download and
install any
available Windows XP compatible drivers, such as
video adapter
and audio drivers.
9. If you happen to run into any installation
difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During
Installation
http://support.microsoft.com/default.aspx?
scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
[Courtesy of MS-MVP Kelly Theriot]