Recovering data from disk using ERD manager/ Diagnostic and Recove

  • Thread starter Thread starter Alexander Banz
  • Start date Start date
A

Alexander Banz

My PC doesn't boot any more and before i want to install xp with the
recovery discs, i would like to get my data off...

with ERD manager I can copy files, which are not effected from C: to D:
I can't copy them to another external drive, since these drives are not
recognized.
I can't copy files to the Boot CD with ERD manager on it.

Are the tools: that allow me to boot and more importantly let me copy to a
external hard drive?

thanks a lot

alex
 
Alexander Banz said:
My PC doesn't boot any more and before i want to install xp with the
recovery discs, i would like to get my data off...

with ERD manager I can copy files, which are not effected from C: to D:
I can't copy them to another external drive, since these drives are not
recognized.
I can't copy files to the Boot CD with ERD manager on it.

Are the tools: that allow me to boot and more importantly let me copy to a
external hard drive?

thanks a lot

alex
Click to expand...
Bart PE.
Jim
 
Thanks Jim

I tried, but I need the XP installation disk, which I don't have because XP
was pre installed.


any suggestion?
 
Alexander said:
Thanks Jim

I tried, but I need the XP installation disk, which I don't have because
XP was pre installed.


any suggestion?
Click to expand...

Knoppix, if you just want to retrieve data. See below for general
instructions.

You will need a computer with two cd drives, one of which is a cd/dvd-rw OR
a usb thumb drive with enough capacity to hold your data OR an external
usb/firewire hard drive formatted FAT32 (not NTFS). To get Knoppix, you
need a computer with a fast Internet connection and third-party burning
software. Download the Knoppix .iso and create your bootable cd. Then boot
with it and it will be able to see the Windows files. If you are using the
usb thumb drive or the external hard drive, right-click on its icon (on the
Desktop) to get its properties and uncheck the box that says "Read Only".
Then click on it to open it. Note that the default mouse action in the
window manager used by Knoppix (KDE) is a single click to open instead of
the traditional MS Windows' double-click. If you want to burn CD/DVDs, use
the K3b program.

http://www.knoppix.net

Malke
 
Malke

thanks, i was actually doing that,... it works. Your description is spot on.

Howver, one of my external hard drives is NTFS......

i'm having a look now at puppylinux....
 
Alexander said:
Malke

thanks, i was actually doing that,... it works. Your description is spot
on.

Howver, one of my external hard drives is NTFS......

i'm having a look now at puppylinux....
Click to expand...

My understanding is that Knoppix has an NTFS driver included in it now, so
you can probably just use that. I'm very old skool about not writing to an
NTFS partition from Linux, but the kids tell me ("you damn kids, get off my
lawn!") that it works just fine. So you don't need to bother with Puppy
Linux. I'll have to read a bit about that and change my Knoppix boilerplate
I suppose.

Malke
 
-"Malke" wrote:

My understanding is that Knoppix has an NTFS driver included in it now, so
you can probably just use that. I'm very old skool about not writing to an
NTFS partition from Linux, but the kids tell me ("you damn kids, get off my
lawn!") that it works just fine. So you don't need to bother with Puppy
Linux. I'll have to read a bit about that and change my Knoppix boilerplate
I suppose.
Click to expand...

Yes.

He should be able to read an ntfs partition directly, but to write to it he
needs to use the ntfs-3g mounter. this is used much the same way as the mount
command, e.g.

ntfs-3g /dev/sda1 /mnt/sda1

Assumung /mnt/sda1 has already been created, of course. You then open
/mnt/dsa1 in Konqueror. It's sda1 for a SATA disk, hda1 for a traditional IDE
disk

Another option, easier for those unfamiliar with the arcane syntax of *nix,
is BartPE. This gives you a Windows-like interface booted from CD, and
handles NTFS natively. Also a smaller download as you just need the
PE-builder sofware, which is a few MB. The rest you get from a Windows CD.
(Or from a Windows\i386 folder on your HD, if you don't have one)
Disadvantage is it doesn't have cd-burning sofware as-is, though you can add
DeepBurner or (I think) Nero.
 
Anteaus said:
Yes.

He should be able to read an ntfs partition directly, but to write to it
he needs to use the ntfs-3g mounter. this is used much the same way as the
mount command, e.g.

ntfs-3g /dev/sda1 /mnt/sda1

Assumung /mnt/sda1 has already been created, of course. You then open
/mnt/dsa1 in Konqueror. It's sda1 for a SATA disk, hda1 for a traditional
IDE disk

Another option, easier for those unfamiliar with the arcane syntax of
*nix, is BartPE. This gives you a Windows-like interface booted from CD,
and handles NTFS natively. Also a smaller download as you just need the
PE-builder sofware, which is a few MB. The rest you get from a Windows CD.
(Or from a Windows\i386 folder on your HD, if you don't have one)
Disadvantage is it doesn't have cd-burning sofware as-is, though you can
add DeepBurner or (I think) Nero.
Click to expand...

Thanks, Anteaus. I'll boot my XP testbed with Knoppix later today and play
around. Maybe because I come from the *nix world I think that Knoppix is
easier to get/create/use than Bart's PE. Yes, it's a bigger download but
you don't need anything else once you've got it. But whatever works; choice
is A Good Thing.

Malke
 
Back
Top