recommend: cheap b&w network laser

  • Thread starter Thread starter ric
  • Start date Start date
R

ric

Hi All,
I'm after a cheap, black and white laser printer to supply for a
customer with a small office.
Needs to have ethernet, and for toner to be reasonably priced.
Smallish footprint, duplex and reasonably quick print speed are all
bonuses but not essential.

Any suggestions for a reliable unit that is going to be fairly
economical to run?

Ric
 
ric said:
Hi All,
I'm after a cheap, black and white laser printer to supply for a
customer with a small office.
Needs to have ethernet, and for toner to be reasonably priced.
Smallish footprint, duplex and reasonably quick print speed are all
bonuses but not essential.

Any suggestions for a reliable unit that is going to be fairly
economical to run?
Click to expand...

Here's info of research I'm doing myself.... all with network
Model - Approx retail price, price/page using toner

HP 1022n - $275, $0.0275/pg
HP 2015dn - $500, $0.0164/pg (with duplex) (Hi capacity toner)
HP 3005n - $700, $0.0132/pg (with high capacity toner)

Lexmark E120n - $150, $0.034/pg, + $0.002/pg (Photoconductor kit)
Lexmark E250dn - $250, $0.02.74/pg + $0.0012/pg (photoconductor kit)

I have others, but too lazy to transcribe from my spreadsheet.

I decided to go with HP 2015dn because I want reliability/compatibility
with old HP 2100, increase in speed and support/supplies into
long future (up to 10 years?) and I hear Lexmark as a
printer/company has issues. I'm not an expert... just my own research...
Oh, plus there's a $150 rebate in the U.S. until the end of september.
 
Find an old Laserjet 4 Plus with a network card installed. Should be
about $30 to $50.
 
Here's info of research I'm doing myself.... all with network
Model - Approx retail price, price/page using toner

HP 1022n - $275, $0.0275/pg
HP 2015dn - $500, $0.0164/pg (with duplex) (Hi capacity toner)
HP 3005n - $700, $0.0132/pg (with high capacity toner)

Lexmark E120n - $150, $0.034/pg, + $0.002/pg (Photoconductor kit)
Lexmark E250dn - $250, $0.02.74/pg + $0.0012/pg (photoconductor kit)

I have others, but too lazy to transcribe from my spreadsheet.

I decided to go with HP 2015dn because I want reliability/compatibility
with old HP 2100, increase in speed and support/supplies into
long future (up to 10 years?) and I hear Lexmark as a
printer/company has issues. I'm not an expert... just my own research...
Oh, plus there's a $150 rebate in the U.S. until the end of september.
Click to expand...

star. thanks for that.
also considering the older LJ4 second hand off ebay...!

Ric
 
I decided to go with HP 2015dn because I want reliability/compatibility
with old HP 2100, increase in speed and support/supplies into
long future (up to 10 years?) and I hear Lexmark as a
printer/company has issues. I'm not an expert... just my own research...
Oh, plus there's a $150 rebate in the U.S. until the end of september.
Click to expand...

Good choice. I got and am very satisfied. One thing to note- the
extra RAM costs a fortune from HP, especially the 256 MB, but
the same memory direct from Kingston cost $28.00 US the last time
I checked. It is available from Amazon for around $22.00.

The Kingston Part # is KTH-LJ2015/256, so you can shop around.
Might as well go for the max while you're at it for not much more $.
 
Of course I meant "printer", not "computer"



Stuart.Hinson wrote the following on 9/7/2007 3:40 PM:
 
Ian D said:
Good choice. I got and am very satisfied. One thing to note- the
extra RAM costs a fortune from HP, especially the 256 MB, but
the same memory direct from Kingston cost $28.00 US the last time
I checked. It is available from Amazon for around $22.00.

The Kingston Part # is KTH-LJ2015/256, so you can shop around.
Might as well go for the max while you're at it for not much more $.
Click to expand...

Alternatively, put the money underneath the printer and use the printer
normally. If you find you need more memory because of errors, spend it
then.

After a year goes by, use that money for something that makes a
difference.

[Added benefit: a $20 bill won't make your printer self-test take longer
every time you turn it on.]
 
Alternatively, put the money underneath the printer and use the printer
normally. If you find you need more memory because of errors, spend it
then.

After a year goes by, use that money for something that makes a
difference.

[Added benefit: a $20 bill won't make your printer self-test take longer
every time you turn it on.]
Click to expand...

Well, the day I got the printer I decided to see what it could do, and
when printing a half page photo at 1200 DPI Pro res I got a not enough
memory message, and it printed at lower res. That was enough for me.

The other consideration is, that right now that particular DIMM seems
to be readily available. As for the longer self-test, it took so long for
the
first boot after I installed the 256 MB that I thought maybe the RAM
was defective. I guess it recognized the new memory and did an
extended self test, because since then, the extra 256 MB adds maybe
10 seconds to the total boot time. Since the printer has a low power
sleep mode I usually just leave it on during the day. It prints instantly
from sleep.

ID
 
Back
Top