S
salasidis
I am using a P975X ASUS motherboard, with OCZ overclockable RAM - OCZ
HPC 1GB - that states in the manual must run at 2.30V (and can
tolerate 2.35V with no damage - I am running them at 2.30V). On two
occasions now, when the computer enters sleep it results in the buring
out of the RAM. This problem only occurs on one computer and not the
other (both are the same motherboard, and set with the same settings.
Only difference is different NVIDIA graphics cards in each.
has anyone run into similar problems - I have elimnated the overclock
voltage settings for now, as I don;t think the RAM is able to handle
hat the manual states (or my motherboard is putting out a higher
voltage than expected).
HPC 1GB - that states in the manual must run at 2.30V (and can
tolerate 2.35V with no damage - I am running them at 2.30V). On two
occasions now, when the computer enters sleep it results in the buring
out of the RAM. This problem only occurs on one computer and not the
other (both are the same motherboard, and set with the same settings.
Only difference is different NVIDIA graphics cards in each.
has anyone run into similar problems - I have elimnated the overclock
voltage settings for now, as I don;t think the RAM is able to handle
hat the manual states (or my motherboard is putting out a higher
voltage than expected).