K
KILOWATT
Hi everyones and thanks for your time!
It's to create a raid 0 array on a P5LD2 Deluxe, with an already installed
OS. It is possible to do that using the Intel Matrix Storage Manager in
Windows? Most references including thoses on the Intel's site refers to the
F6 installation method, hence, during Windows install. The ahci driver was
loaded during the actual OS installation (F6 method), so the single sata2
hdd is operating in ahci. But that doesn't make the system "raid ready"
isn't it?
TIA for your reply...
--
Alain(alias:Kilowatt)
Montréal Québec
PS: 1000 excuses for grammatical errors or
omissions, i'm a "pure" french canadian!
(If replying also by e-mail, remove
"no spam" from the adress.)
It's to create a raid 0 array on a P5LD2 Deluxe, with an already installed
OS. It is possible to do that using the Intel Matrix Storage Manager in
Windows? Most references including thoses on the Intel's site refers to the
F6 installation method, hence, during Windows install. The ahci driver was
loaded during the actual OS installation (F6 method), so the single sata2
hdd is operating in ahci. But that doesn't make the system "raid ready"
isn't it?
TIA for your reply...
--
Alain(alias:Kilowatt)
Montréal Québec
PS: 1000 excuses for grammatical errors or
omissions, i'm a "pure" french canadian!
(If replying also by e-mail, remove
"no spam" from the adress.)