RAID Setup

  • Thread starter Thread starter JR
  • Start date Start date
J

JR

I am running a P4 3Gig system with WIN2000 Pro as the OS
on an ASUS P4C800E-Deluxe board with a SATA RAID using two
Hitachi Deskstar 7K250 80GB drives. I downloaded and
installed a critical update and now receive the following
error message and the RAID array is off line. Any
suggestions?

*** Stop: 0X0000000A (0X007AC008, 0X00000002, 0X00000001.
0X8006543A) *** Address 8006543A base at 8006200, Date
Stamp 3e7a733a - hal.dll
 
Scott,

Thanks for repsonding back. No, I can't boot to Safe
Mode. The array is off line. I ran the Hitachi fitness
test on the drives and it was fine. I reset the arry, but
still get the error.
 
Bring the array back oline
Use recovery console to see if you have Pin1394.sys in
%WINDIR%\System32\Drivers
This is the Pinnacle Systems 1394 (firewire) driver
If so, rename this file e.g. pin1394.old and type exit and then enter.
Ralph [MSFT]

"This posting is provided "AS IS" with no warranties, and confers no
rights."
 
Back
Top