Raedon 9600 pro (Code 43) error????

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I downloaded and installed the Vista drivers from ATI but i have this error
in the Hardware properties for this device. I did a search on microsoft and
ati's site about this error code but nothing came up. Any ideas? I have the
32 bit Vista install and used the 32 bit drivers from ATI.
 
Well, i finally got it to work. NOTE: the proceeding is all done in safe
mode. I Unistalled all ATI drivers, even writing down the files that were in
the system32 folder and system32/drivers folder and deleting those too (the
come back any way but still.) I then went to my xp drive and copied some ati
drivers from there. I started with the oldest driver first which was 5-10.
I used the single installes were the driver install and control panel install
are seprate. i then used the installer in the driver only install and
restarted Vista into normal state. When it finished loading it was working
^^. It detected that the Raedon 9600 Series was my display adapter and
brougth my rating up to 2 (still cant use aero theme though T_T, im still
working on that one.) I hope this helps any who read it!
 
Have you tried using Live TV with this card, if so what's your results.
'
I ask becuase I constantly get stuttering in live TV but everything else in Vista works just fine, its just the Live TV that's giving me issues..

Thanks in Advance

--
System Specs:
---------------------------------------------------------------------------------------
AMD Duron Processor 1.3GHz
1Gig of RAM
ATI 9600 Pro Series 128 Mb
Envision 17" Monitor connect on VGA
40 inch Zenith on Component Output
ATI e-HomeWonder
ATI 7500 card (Deactivated in Vista)
 
rhoaju said:
Well, i finally got it to work. NOTE: the proceeding is all done in safe
mode.
Click to expand...

Thanks to you!

I'd the same problem and now it works perfectly with catalyst 6.5 for WinXP
:-PPP
 
Back
Top