Radeon 7000/VE

  • Thread starter Thread starter Patrick B
  • Start date Start date
P

Patrick B

Hello,

I've installed the most recent Omega drivers and sent straight to the
Clockrate TAB and checked the settings, seems that the card's clock rates
are set very low and that the specs (from ATI's site) are the following:

Core: 183 Mem: 366
Are these settings correct? Shall I implement them?

Cheers
Patrick
 
Patrick B said:
Hello,

I've installed the most recent Omega drivers and sent straight to the
Clockrate TAB and checked the settings, seems that the card's clock rates
are set very low and that the specs (from ATI's site) are the following:

Core: 183 Mem: 366
Are these settings correct? Shall I implement them?
Click to expand...

183/183 (366) is the default core/mem clock for this card. You don't need to
set default rates.
 
Augustus said:
183/183 (366) is the default core/mem clock for this card. You don't need to
set default rates.
Click to expand...

Another point is that if the vidcard is not built by ATI, then the clock
rates can be something else. The memory chips' stamps should be closely
inspected and their speed rating clarified before clocking them to
anything else than their default speed (by the vidcard bios) is.

Like Augustus said, you might have misintepreted the default memory
speed: the effective speed is double the rate the memory is ticking in
case it is DDR. On the other hand, if the card is not built by ATI, the
memory used might be SDR. Check the memory stamps to be sure.
 
Back
Top