question to gargle?

  • Thread starter Thread starter Billyb
  • Start date Start date
B

Billyb

I have installed Ethernet cards in both PC's with a cable
connecting them. I thought I wouldn't need a hub or
switch?
Thanks, Bill
 
Paul Russell said:
You do unless you have a cross-over cable
Click to expand...
Paul's correct. But recently I saw an adapter that could perform the
crossover function for a couple of quid on one of the computing/office
supplies catalogues (UK, Inmac/microwarehouse maybe). At long last! I often
wondered why no-one's invented one of these yet.
 
Actually Intel is promoting network cards can autodetect if the cable is a
cross over or not and can automatically adjust the network cards behavior
accordingly.

This is a great diagnostics feature .
 
Paul Russell said:
Actually Intel is promoting network cards can autodetect if the cable is a
cross over or not and can automatically adjust the network cards behavior
accordingly.

This is a great diagnostics feature .
Click to expand...

That might be fun if there's an intel card on each end and they spend
endless hours deciding which one's going to be the crossed one.
 
Well it's cable detection, it is a matter of the card determining if it
should switch pin polarity around or not ;)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Mobile Broadband / Ethernet clash 6
SETTING UP 2 DESKTOPS TO COMMUNICATE 2
netowrk with 2 ISPs. 2
using a Ethernet connection as a input to Ethernet switch to be ableto connect many machines to netw 1
Cables not detected 2
connect a pc to a laptop 2
Will the Gigabit Ethernet Hub make a difference in Internet speed? 2
AOL Network 2

Back
Top