Question about ICS with 2 network adapters

  • Thread starter Thread starter Jasper
  • Start date Start date
J

Jasper

I have a home network with internet connection sharing.
The network has two windows 2000 computers. The
computers are connected with ethernet. One of the
computers has an internet connection, and this is shared
by the other computer. The computer which is sharing
the internet connection also has a bluetooth adapter, and
I use this adapter to create a seperate network between
it and an ipaq pocket pc. Here is my ipconfig output

Ethernet adapter Bluetooth Network:

Connection-specific DNS Suffix . :
Autoconfiguration IP Address. . . : 169.254.143.80
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.121
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

The thing that I wanted to know is if it would be possible to access
the internet from the ipaq. At the moment, I can access from the
ipaq my local www server on 192.168.0.121, but I cannot access
the internet. I also noticed that the Buetooth adapter does not have
a Default Gateway. Is there a way to configure the Bluetooth
adapter to use the 192.168.0.1 gateway, or is this not possible?
 
Hi

In the adapter that is using the ICS must have the 192.168.0.1 IP
And on the IPAQ use the 192.168.0.1 as default gateway
 
Back
Top