Question about CDROM 942E/AKO

  • Thread starter Thread starter ==Blitz==
  • Start date Start date
B

==Blitz==

I just installed a MB M266A with AMIBIOS v1.9, SDRAM 128M, Celeron 2.4, (2)
HDD, Floppy Drive, and Aopen 942E/AKO CDROM.

I am unable to boot from the CDROM although the BIOS detects the CDROM on
IDE 2 as Master. During boot, the system reports "Searching for bootable CD"
gives up and then searches from next boot device.

I have checked/changed drive cable, re-seated connectors, and re-seated
jumper. The CDROM works on another system. I do not know what else to
check. Any suggestions?

Thanks in advance.
 
Additional info: I swapped the AO CDROM with another CDROM. No change. Then
moved cable to IDE 1. No change. System finds CDROM at boot but can not read
CDs.

Thanks again
 
Back
Top