QFE for SP2

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

When I look at the available QFEs for XPE, they say SP1 or do not mention any
SP. I have SP2 and am not sure which QFEs I need. Thanks!!

DK
 
Check the OEM Secure site... https://microsoft.embeddedoem.com you will have
to register, if you don't have access already...

There are some in there

HTH,
JC

--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division



When replying directly to this message remove the NOSPAM_ from the address
 
That is the site I am asking about. I go to XP Embedded downloads and then
QFE updates. The first page has SP1 at the top. I then go to Windows XP
Embedded and this page has the actual QFEs on it where most of them say "XP
Embedded SP1" Which ones are for SP2?
 
Once inside, you go to Downloads and technical resources>WindowsXP
Embedded>Features and updates... once that page loads, you will see on the
left column, "Windows XP Embedded SP2 Updates" Click there, and on the Next
page you have "Windows XP Embedded" that's the link to the QFE's for SP2...
also there's another category for updates using the DesktopQFE installer.
you can apply those if you're using the DQI... those are applied to RT
images...

HTH,
JC

--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division



When replying directly to this message remove the NOSPAM_ from the address
 
NP... that's what we are here for! :-)

--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division



When replying directly to this message remove the NOSPAM_ from the address
 
Back
Top