Q: P2B-S CPU Temp.

  • Thread starter Thread starter alex
  • Start date Start date
A

alex

I have Tualatin 1GHz mounted on Asus S370-DL card and LianLam fcpga2 adapter
and works very good! When I enter bio Power Managment CPU Temp. is N/A! I
have sensor from Abit Be6 motherboard and when I put it on the CPU and
connect it to the TRCPU in bios temperature for cpu shows 129 degres C???
Why is that and I can I repair that some how???

board is Asus P2B-S rev. 1.04, bios 1014 beta3
Asus S370-DL + LianLam FCPGA2 adapter and Tualatin 1GHz (1,5V)
4*256MB PC133 Kingmax

thanks!
 
alex said:
I have Tualatin 1GHz mounted on Asus S370-DL card and LianLam fcpga2 adapter
and works very good! When I enter bio Power Managment CPU Temp. is N/A! I
have sensor from Abit Be6 motherboard and when I put it on the CPU and
connect it to the TRCPU in bios temperature for cpu shows 129 degres C???
Why is that and I can I repair that some how???
Click to expand...

129C is the maximum possible reading, and is what you get if you connect
the two TRCPU pins together. The sensor is defective, shorted out.

You can make a new sensor from a 10K ohm thermistor and a 2-pin header.
 
Back
Top