Putting a Border On a Partial Row

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Here is some code I wrote to put a border at the bottom of a list of numbers, but above the totaling functions and text I don't know how to go to the bottom of column G, then down 1 row, then select the cells from there left across to column M. The number of rows in the table will change from one time to the next, but the number of columns will not. Any help would be appreciated. I've used Excel for a number of years, but haven't had a need to do programming until now.


Private Sub btnSummary_Click()
ActiveSheet.Range("L7").End(xlDown).Offset(1, 0).Formula = "TOTAL"
ActiveSheet.Range("L7").End(xlDown).Offset(0, 0).HorizontalAlignment = xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1, 0).FormulaR1C1 = "=Sum(R2C:R[-1]C)"
ActiveSheet.Range("L7").End(xlDown).Offset(1, 0).Formula = "Total Times 71.25%"
ActiveSheet.Range("L7").End(xlDown).Offset(0, 0).HorizontalAlignment = xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1, 0).FormulaR1C1 = "=.7125*(R[-1]C)"
Range("G7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("H7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("I7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("J7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("K7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("L7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("M7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("G8").Select

End Sub
 
Activesheet.Range("G7").End(xldown).Offset(1,0).Resize(1,7).Select

--
Regards,
Tom Ogilvy

Normajm said:
Here is some code I wrote to put a border at the bottom of a list of
Click to expand...
numbers, but above the totaling functions and text I don't know how to go
to the bottom of column G, then down 1 row, then select the cells from there
left across to column M. The number of rows in the table will change from
one time to the next, but the number of columns will not. Any help would be
appreciated. I've used Excel for a number of years, but haven't had a need
to do programming until now.
Private Sub btnSummary_Click()
ActiveSheet.Range("L7").End(xlDown).Offset(1, 0).Formula = "TOTAL"
ActiveSheet.Range("L7").End(xlDown).Offset(0, 0).HorizontalAlignment = xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1, 0).FormulaR1C1 = "=Sum(R2C:R[-1]C)"
ActiveSheet.Range("L7").End(xlDown).Offset(1, 0).Formula = "Total Times 71.25%"
ActiveSheet.Range("L7").End(xlDown).Offset(0, 0).HorizontalAlignment = xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1, 0).FormulaR1C1 = "=.7125*(R[-1]C)"
Range("G7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("H7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("I7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("J7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("K7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("L7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("M7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("G8").Select

End Sub
Click to expand...
 
Thank you. I've been learning so much here by reading
other people's questions and the replies to them. Keep up
the good work.
-----Original Message-----
Activesheet.Range("G7").End(xldown).Offset(1,0).Resize (1,7).Select

--
Regards,
Tom Ogilvy

Normajm said:
Here is some code I wrote to put a border at the bottom
Click to expand...
of a list of
numbers, but above the totaling functions and text I don't know how to go
to the bottom of column G, then down 1 row, then select the cells from there
left across to column M. The number of rows in the table will change from
one time to the next, but the number of columns will not. Any help would be
appreciated. I've used Excel for a number of years, but haven't had a need
to do programming until now.
Private Sub btnSummary_Click()
ActiveSheet.Range("L7").End(xlDown).Offset(1, 0).Formula = "TOTAL"
ActiveSheet.Range("L7").End(xlDown).Offset(0,
Click to expand...
0).HorizontalAlignment =
xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1,
Click to expand...
0).FormulaR1C1 =
"=Sum(R2C:R[-1]C)"
ActiveSheet.Range("L7").End(xlDown).Offset(1,
Click to expand...
0).Formula = "Total Times
71.25%"
ActiveSheet.Range("L7").End(xlDown).Offset(0,
Click to expand...
0).HorizontalAlignment =
xlRight
ActiveSheet.Range("M7").End(xlDown).Offset(1,
Click to expand...
0).FormulaR1C1 =
"=.7125*(R[-1]C)"
Range("G7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("H7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("I7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("J7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("K7").End(xlDown).Offset(1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("L7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("M7").End(xlDown).Offset(-1, 0).Select
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Range("G8").Select

End Sub
Click to expand...


.
Click to expand...
 
Back
Top