Have you checked the Event Viewer to see if there are any error messages
relating to that hang?
Have you tried alternative methods of installing such as using Virtual Drive
software such as Daemon Tools or NERO Image drive? Have you tried extracting
the contents of the ISO to a folder in an existing install of Windows, and
launch setup from there?
Try reburning the ISO at a low speed, 2x recommended, also do a CRC check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.
I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html
Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:
x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04
Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.
--
--
Andre
Windows Connected |
http://www.windowsconnected.com
Extended64 |
http://www.extended64.com
Blog |
http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta