Problems with starting windows xp embedded

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did exactly what
they said on the website of microsoft. I created 700mb another partition I
created image and put in the partition. I rewrote boot ini file and restart
windows xp professional. Next I started windows embedded. First my bad
fillings was that the logo was windows xp not embedded. Next windows try to
install component and each time during the instalation my computer is
rebooted. Does somebody any experience and can tell me hwat I did wrong?
Thank for any replay.
 
Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
 
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


Martin Grossen said:
Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to expand...
 
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows embedded.
During the instalation I put G partition too. I don't understand where I can
change it now.

Martin Grossen said:
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


Martin Grossen said:
Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did exactly
what
they said on the website of microsoft. I created 700mb another
partition I
created image and put in the partition. I rewrote boot ini file and
restart
windows xp professional. Next I started windows embedded. First my bad
fillings was that the logo was windows xp not embedded. Next windows
try
to
install component and each time during the instalation my computer is
rebooted. Does somebody any experience and can tell me hwat I did
wrong?
Thank for any replay.
Click to expand...
Click to expand...
Click to expand...
 
Drive letters are always tricky for dual booting. You might want to take a
look at this article on dual booting:

http://www.seanliming.com/Docs/XPE Dual Boot Tips.pdf

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit


Nemesis said:
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows embedded.
During the instalation I put G partition too. I don't understand where I
can
change it now.

Martin Grossen said:
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity
Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


:

Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did
exactly
what
they said on the website of microsoft. I created 700mb another
partition I
created image and put in the partition. I rewrote boot ini file and
restart
windows xp professional. Next I started windows embedded. First my
bad
fillings was that the logo was windows xp not embedded. Next windows
try
to
install component and each time during the instalation my computer
is
rebooted. Does somebody any experience and can tell me hwat I did
wrong?
Thank for any replay.
Click to expand...
Click to expand...
Click to expand...
 
Nemesis

Note, that during this early boot-state, no drive letters are known.
So the ntldr will count the partitions.
Biggest problem to the normal XP prof is, that the CD or
DVD ROMs are not counted.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows embedded.
During the instalation I put G partition too. I don't understand where I
can
change it now.

Martin Grossen said:
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity
Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


:

Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did
exactly
what
they said on the website of microsoft. I created 700mb another
partition I
created image and put in the partition. I rewrote boot ini file and
restart
windows xp professional. Next I started windows embedded. First my
bad
fillings was that the logo was windows xp not embedded. Next windows
try
to
install component and each time during the instalation my computer
is
rebooted. Does somebody any experience and can tell me hwat I did
wrong?
Thank for any replay.
Click to expand...
Click to expand...
Click to expand...
 
Hello,

Thank for replay. It works now:) How you said it was error of my letter
disc. I correct this and Now is ok. Thank for articles.

I have questions still.

1)I would like to check Labview in this system. I have already installed in
Windows Xp. Do I have to do again for this system?

2) I saw in tutorials that they added Tweak UI Control Panel applet. I
couldn't find this during instalation. Do I creat this somehow myself?

3) I Don't see a icon "system'. Does it exist in windows embedded? I don't
have drivers for many hardare adn I would lik eto repair it but I don't know
how whitout that icon.



Martin Grossen said:
Nemesis

Note, that during this early boot-state, no drive letters are known.
So the ntldr will count the partitions.
Biggest problem to the normal XP prof is, that the CD or
DVD ROMs are not counted.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows embedded.
During the instalation I put G partition too. I don't understand where I
can
change it now.

Martin Grossen said:
Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity
Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


:

Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did
exactly
what
they said on the website of microsoft. I created 700mb another
partition I
created image and put in the partition. I rewrote boot ini file and
restart
windows xp professional. Next I started windows embedded. First my
bad
fillings was that the logo was windows xp not embedded. Next windows
try
to
install component and each time during the instalation my computer
is
rebooted. Does somebody any experience and can tell me hwat I did
wrong?
Thank for any replay.
Click to expand...
Click to expand...
Click to expand...
 
Nemesis,
1)I would like to check Labview in this system. I have already installed
in
Windows Xp. Do I have to do again for this system?
Click to expand...

Yes, you are creating your own XP system here. This is not corelating the Xp
prof
system on the other partition. You find on www.xpefiles.com some
ccomponents already done for national Labview- Search in Software on page 2.

2) I saw in tutorials that they added Tweak UI Control Panel applet. I
couldn't find this during instalation. Do I creat this somehow myself?
Click to expand...

Yes, the Tweack UI is a seperate control pannel. You have to
generate an own component fot this. Thought, this was also a tutorial to
create this component.

3) I Don't see a icon "system'. Does it exist in windows embedded? I don't
have drivers for many hardare adn I would lik eto repair it but I don't
know
how whitout that icon.
Click to expand...

Did you added the "system control panel" component ?
Every UI has it's own component.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
Hello,

Thank for replay. It works now:) How you said it was error of my letter
disc. I correct this and Now is ok. Thank for articles.

I have questions still.

1)I would like to check Labview in this system. I have already installed
in
Windows Xp. Do I have to do again for this system?

2) I saw in tutorials that they added Tweak UI Control Panel applet. I
couldn't find this during instalation. Do I creat this somehow myself?

3) I Don't see a icon "system'. Does it exist in windows embedded? I don't
have drivers for many hardare adn I would lik eto repair it but I don't
know
how whitout that icon.



Martin Grossen said:
Nemesis

Note, that during this early boot-state, no drive letters are known.
So the ntldr will count the partitions.
Biggest problem to the normal XP prof is, that the CD or
DVD ROMs are not counted.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nemesis said:
I saw it. But I don't understand. In my boot.ini I put drivers where is
system. I have 5 partition and G is partition where is windows
embedded.
During the instalation I put G partition too. I don't understand where
I
can
change it now.

:

Incorrect WinDir: [G:\WINDOWS]
should be [E:\WINDOWS]

Is the key to your problem.
Change the path in your settings.



--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hello Martin,

Thank you for response. I found those errors:

2:45:30 AM - [FBASetProgressText] Setting PNP Flag...
2:45:31 AM - [FBAApplySecurityStringToRegKey] RegSetKeySecurity
Failed!
Error: 0x6
2:45:31 AM - [FBAReplaceSecurityInRegistry]
FBAApplySecurityStringToRegKey(009) #1 Failed!
2:45:40 AM - [FBAFixWindowsPathsInRegistry] Incorrect WinDir:
[G:\WINDOWS]
should be [E:\WINDOWS]
2:45:40 AM - [FBAProcessRegisterDLLs] 65536081 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]
2:45:40 AM - [FBAProcessRegisterDLLs] 72089682 -> Invalid Path:
[G:\WINDOWS\FBA\FBALIB.DLL]


:

Hi Nemesis

The logo is ok.
XP-Embedded is based on the XP Pro binaries.

To the reboot:
Check the Target Device settings under Settings of your image.
Also consult the FBA (First Boot Agent) log on the harddisk
located in the Windows\FBA\fbalog.txt file to find it out.


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Newsbeitrag
Hello everybody,

I have just installed Windows Xp Embedded on my computer. I did
exactly
what
they said on the website of microsoft. I created 700mb another
partition I
created image and put in the partition. I rewrote boot ini file
and
restart
windows xp professional. Next I started windows embedded. First
my
bad
fillings was that the logo was windows xp not embedded. Next
windows
try
to
install component and each time during the instalation my
computer
is
rebooted. Does somebody any experience and can tell me hwat I did
wrong?
Thank for any replay.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top