Problems with image

  • Thread starter Thread starter greiner
  • Start date Start date
G

greiner

I recently purchased a diamondmax 10 250 GB hdd and a promise SATA2
TX2PLUS controller. I have an old 120JB Western digital drive I want
to copy over to it. It's currently my secondary drive (no OS) that I
install some programs and store my files on. I purchesed partition
magic 8.0 and ghost 9.0 to move the disk over. Whenever I install
ghost, my computer won't reboot, either in normal or safe mode.
Whenever I try to "copy partition" in partition magic, I get this error
"Access violation at address 00563727 in module 'Pmagicnt.exe.'
Read of address 00000016."

I have contacted Symantec, with less than spectacular results. The
only useful help they gave me was "turn off DEP for those programs" and
"uninstall all veritas software", which I've done. Someone in the
forums mentioned that partition magic is not compatable with Half Life
2, so I unstalled that and Steam as well. The same thing keeps
happening. I've also tried partition magic in safe mode and the rescue
disks, also no luck. I have no other indications of anything else
wrong with my computer. If this helps, my boot drive consists of 2 WD
Raptor 36 GB disks in a RAID 0 connected to an ABIT IS7 mobo.
Thanks in advance...
 
Hello. If memory serves me correctly, the DiamondMax should come with a
MaxBlast CD that offers to copy the data off the new drive and put it
on the new one. You boot from the CD, and it doesn't involve windows or
any of that other software at all. Why don't you try that? I seem to
remember using that in the past with satisfactory results.

Irwin
 
I bought the drive OEM, but I still downloaded that software. The main
problem is that it doesn't recognise the drive on boot, since it's
attached to a controller.
 
Previously said:
I recently purchased a diamondmax 10 250 GB hdd and a promise SATA2
TX2PLUS controller. I have an old 120JB Western digital drive I want
to copy over to it. It's currently my secondary drive (no OS) that I
install some programs and store my files on. I purchesed partition
magic 8.0 and ghost 9.0 to move the disk over. Whenever I install
ghost, my computer won't reboot, either in normal or safe mode.
Whenever I try to "copy partition" in partition magic, I get this error
"Access violation at address 00563727 in module 'Pmagicnt.exe.'
Read of address 00000016."
Click to expand...
I have contacted Symantec, with less than spectacular results. The
only useful help they gave me was "turn off DEP for those programs" and
"uninstall all veritas software", which I've done. Someone in the
forums mentioned that partition magic is not compatable with Half Life
2, so I unstalled that and Steam as well. The same thing keeps
happening. I've also tried partition magic in safe mode and the rescue
disks, also no luck. I have no other indications of anything else
wrong with my computer. If this helps, my boot drive consists of 2 WD
Raptor 36 GB disks in a RAID 0 connected to an ABIT IS7 mobo.
Thanks in advance...
Click to expand...

You could try removing all drives except the two you want to copy
between and the run ghost from bootable floppy.

Arno
 
Back
Top