problems with external time server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,

i have problems with external time server.
one domain controller is configured to set time from a external time server.
i have no firewall on this server

the eventlog says
The NTP server <server> isn't synced, time not set.

when a try the command w32tm -once, i received this:
C:\>w32tm -once
W32Time: BEGIN:InitAdjIncr
W32Time: Adj 156248 , Incr 156250 fAdjust 0
W32Time: 156248 Adj!=Incr 156250
W32Time: END:Line 2503
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1407
W32Time: TimeMMInit()
W32Time: Kernel timer : using default maximum resolution
W32Time: MaximumTime = 156250
W32Time: CurrentTime = 156250
W32Time: Timer calibrated, looped 1 times
W32Time: BEGIN:InitTmCfg
W32Time: END:Line 807
W32Time: BEGIN:InitTmCli
W32Time: END:Line 2596
W32Time: BEGIN:InitTmData
W32Time: END:Line 2618
W32Time: AvoidTimeSyncOnWan 0
W32Time: ntpserver - xx.xxx.xx.x (the ip is changed in x)
W32Time: BEGIN:CMOSSynchSet
W32Time: Setting adjustment 156248 - Bool 0
W32Time: BEGIN:SetTSTimeRes
W32Time: END:Line 1295
W32Time: END:Line 864
W32Time: BEGIN:InitializeDC
W32Time: BEGIN:GetRole
W32Time: Role is 'PDC'
W32Time: END Line 672
W32Time: BEGIN:FetchParentDomainName
W32Time: NetLogonGetTimeServiceParentDomain() returned 54b with ptr 0
W32Time: END:Line 782
W32Time: END:Line 704
W32Time: Server: Binding to 1 NIC.
W32Time: bind failed: 0x80072740
W32Time: Logging event 0xC0000031. 15 min until this event is allowed again.
W32Time: 0xC0000031 reported to System Log in Event Viewer
W32Time: BEGIN:FinishCleanup
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1407
W32Time: BEGIN:UnInitializeDC
W32Time: Ptrs 0 - 0
W32Time: END:Line 727
W32Time: Time service stopped.
W32Time: END:Line 407



who can help me?

thanks
 
Hello Gunter,

You have to configure the PDCEmulator for it not only one DC.


Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
 
this DC is Windows 2000, your solution i for windows 2003

in the registry are the following entries
HKLM/System/CurrentControlSet/Services/W32Time/Parameters
Adj REG_DWORD 0x00026258(156248)
LocalNTP REG_DWORD 0x00000000(0)
MsSkewPerDay REG_SZ -4810,6667
ntpServer REG_SZ xx.xxx.xxx.x (IP is changed in x)
Period REG_SZ SpecialSkew
ReliableTimeSource REG_DWORD 0x00000001(1)
type REG_SZ NTP
 
Hello Gunter,

Nice to hear.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
 
Back
Top