Problems with Epson 1200S on Win2k SP3

  • Thread starter Thread starter Fokke Nauta
  • Start date Start date
F

Fokke Nauta

Crosspost, follow-up to comp.periphs.scanners.

Hi all,

I have an Epson 1200S SCSI scanner on an Adaptec 2910 SCSI adapter.
OS is Win2k Prof, SP2.
If I power up the scanner whilst the PC is up and running, the scanner is
recognized after running Scsi-explorer. So there is no need to reboot.
Unfortunately, after installing SP3 this "feature" does no longer exist. I
really need to reboot the system when the scanner is powered up whilst the
PC is running. As this is rather annoying, it was a reason not to install
SP3.
Does any of you have an experience with this or with W2k Pro +SP4 ?

Thanks in advance.

Best regards,

Fokke Nauta
 
AS said:
Go to Hardware button and in Device Manager do Refresh. It works for me.
Click to expand...

<cut>

I'm not quite sure what you mean.
Have you installed SP3 or 4? You can power up a SCSI scanner and it will be
recognizes straight away?
And I cannot find anything to Refresh in the Device Manager.

Regards,

Fokke Nauta
 
I have installed SP4.
I found that SCSI-devices (I have 2 SCSI scanners) are *not* recognized when
powered during running of the PC. Recognition of these devices only occurs
with SP 1 or 2.

This means I stick to SP2.

Rgs, Fokke
 
Back
Top